HENSLEEANDKENSLEE.COM

Install Windows XP on the laptop pre-installed Vista

This is a complete guide step by step so you can install Windows XP on the laptop Vista pre-installed. When trying to install Windows XP on our laptop, we are faced with making a mistake that frustrates us. Most of the time we get a blue screen with some code and instructions for example, check your hardware or hard disk not found and run scandisk with / f key.
This guide aims to answer these Check questions drive, plus the fact that the unit is new and only a few hours after birth.

Can understand the logic this problem. Windows XP actually obsolete technology supports ATA hard drive and does not support SATA drives. While Windows Vista is the latest operating system as

compared to Windows XP, Windows Vista, even has an advantage over its predecessor and drivers for Serial ATA (SATA).

Thus, if for any through Windows XP recognizes SATA hard drive, Windows XP is installed.

That is our goal in this guide to make Windows XP as an upgrade recongnised our past records units.

Precautions:

But you should take some precautions during the execution of this project. Mac DVD backup of your system for future use. You should check the web for Windows XP drivers. If Windows XP drivers are not found, installing Windows XP will not be beneficial, because the operating system will not be able to effectively use the hardware resources. As an integrated Web cam touchpad, built in W-LAN, Bluetooth and sound system does not work, if drivers are not available for Windows XP.

Let our work.

Tools required for this project.

• software for merging nLite Windows XP SATA drives. Download the latest version of www.nliteos.com
• Freeware FACILITY home edition download Windows Vista partition www.partation-tools.com/download.htm Master has the potential to reduce the units, but this utility is to limit and restrict the same after changing the size of a few. With EASEUS, you can easily change the size / Cut / delete or create a partition without limitation and without any error.
• You need to blank CDs to write the end.
• Last but certainly not least Windows XP CD installation source.

These are the tools we need for the Windows XP boot.

Step # 1. Copy and paste all the files and folders from Windows XP CD installation on the local hard disk.

Step # 2. Now gather some information on your machine. Click Start -> All Programs -> Accessories -> System Tools and click System Information. A new window, click Conflicts / Sharing. After some time the information is displayed in the right pane. However, on the File menu, click Save to save the information material and text information.

href = "http://www.shinningpak.com/wp/wp-content/uploads/2009/10/system-information.jpg"> Step # 3. In the right pane, you've noticed some information. For computers based Intel motherboard, you'll see something like that ICHx. Where X represents the number 7-10. For example, ICH10. On my system, I ICH9. It is part of our team is corrected in Windows XP. Now the Intel website Download driver charge for this south bridge. Download Driver for ICH9R here. Driver is in pill form and name it as in the picture below.

Step # 4. NLite Install and run the program. Guide to this program for the source Windows XP installation. Nlite you acknowledge and show information about Windows XP source.

Step 5. Click Next and you will see a screen near you. Click the Next button and jump.

The next screen is very important and many options. For our main objective, click on the iso and push button starter. The two buttons are highlighted. Click Next.

  Step # 6. We have downloaded driver for our South Bridge (ICH9), which has been compressed. Use software compression winrar extract himself as a folder. Here you will see many files extracted from the compressed folder.

Step # 7. Back to nLite and the button, click Import. Click on one controller, locate the extracted folder and you will see two files. Click iaAHCI file to import. You will see a new window.

Step # 8. Make sure the option to select a text. Now, select all with CTRL + A and click Next. integration processes are started. After completing the pilot of the merger process, click Next, the following screen appears.

Step # 9. If you want to save the image and burn later chose to save the image or choose writing. Leave all other options in case of default and wait for the completion of the recording process.

Congratulations, you've set up Windows XP boot CD supported SATA controller. Your system is ready for the installation of Windows XP.

Visit http://www.bloggingjunkie/install-windows-xp-on-vista-pre-installed-laptop.html

About the Author

I am a Banker by Profession and Internet Power User. I love playing computer games, racing games are my faviourate. I started this blog to put all the knowledge and information related to computer Hardware, Software and Internet on web that I have. Blogging is best way to express my thoughts and views.

IPHONE 3G SCREEN GLASS PRE INSTALLED REPLACEMENT PART $49.95